ProjectTechnik - An Alberta BMW Forum
http://www.projecttechnik.com/forum/

FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 rails
http://www.projecttechnik.com/forum/viewtopic.php?f=10&t=8373
Page 1 of 1

Author:  scope951 [ Mon May 30, 2016 2:20 pm ]
Post subject:  FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 rails

Hello,

I am selling a pair of Bride gias low max (recliner) seats with carbon kevlar backing in pristine condition. They are on "Type RH" rails and fit the e36 m3, probably other cars too but you'll have to do your own research.

Seats were cleaned often and well taken care of, they look and feel brand new, 10/10 condition.

I have more pictures (upload limit is 1 MB). If seriously interested, PM me and I will send you a link.

SOLD


PM me if you're interested, I'll check back daily.

Thanks

Author:  jmeisl [ Mon May 30, 2016 2:29 pm ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

:O

Author:  MyzM3 [ Mon May 30, 2016 3:35 pm ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

Timing is all off man.
Why Why Why Why Why :banghead: :banghead: :banghead:

Author:  scope951 [ Tue May 31, 2016 2:12 pm ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

Yeah sorry the timing never seems to work out eh. What did you pick up instead?

They're conditionally sold to an STi driver coming down from Edmonton already.

Best of luck in your search.

Author:  MyzM3 [ Tue May 31, 2016 3:43 pm ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

scope951 wrote:
What did you pick up instead?

A Real Legit Bride.....An Actual one, in the Flesh.
Just one though.....& its already costing me over $10K
Wedding is in a few weeks :sad:

Author:  jmeisl [ Wed Jun 01, 2016 7:46 am ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

MyzM3 wrote:
scope951 wrote:
What did you pick up instead?

A Real Legit Bride.....An Actual one, in the Flesh.
Just one though.....& its already costing me over $10K
Wedding is in a few weeks :sad:


I had to read this twice lol

I was like dude, I'm pretty sure these are legit bride seats... thats kind of insulting. :hahano: OOOOOOOH I get it, I get it, HAHAHA, clever

Author:  scope951 [ Fri Jun 03, 2016 12:52 pm ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

Hahahaha, a real legit bride is better than these two twins ;). Congrats

Author:  s2catzo335 [ Wed Jun 08, 2016 4:27 pm ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

MyzM3 wrote:
scope951 wrote:
What did you pick up instead?

A Real Legit Bride.....An Actual one, in the Flesh.
Just one though.....& its already costing me over $10K
Wedding is in a few weeks :sad:


Please please tell me how you were able to keep that real bride around 10k

We aren't getting married until next year and if I can keep my wedding to just over 10k it would be a miracle....and she is in no way high maintenance.

teach me sense teach me!

Author:  MyzM3 [ Wed Jun 08, 2016 4:53 pm ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

Ok.
Lesson 1:
Always Read/Listen carefully

MyzM3 wrote:
costing me over $10K


:lmao: :lmao: :lmao:

Jokes aside, Its no laughing matter but sadly due to the fires we've had to make some difficult decisions.
I've still got a wedding back home as well.
That's landed me easily $20K with all flights in.
Canadian wedding is around 18K including flights.

Author:  OEMwhore [ Mon Oct 03, 2016 10:37 am ]
Post subject:  Re: FS: Pair of Bride Gias Low Max Carbon Kevlar w/ e36 m3 r

scope951 wrote:
Hello,

I am selling a pair of Bride gias low max (recliner) seats with carbon kevlar backing in pristine condition. They are on "Type RH" rails and fit the e36 m3, probably other cars too but you'll have to do your own research.

Seats were cleaned often and well taken care of, they look and feel brand new, 10/10 condition.

I have more pictures (upload limit is 1 MB). If seriously interested, PM me and I will send you a link.

SOLD


PM me if you're interested, I'll check back daily.

Thanks

Meant to PM, my bad

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/